返回首页
当前位置: 首页 > 师资队伍 > 自动化系 > 正文

庄礼鸿教授

E-mail:lipuu@qq.com

研究方向:智能系统、智能机器人、医学图像处理、医学仪器系统、机械视觉等。

个人简介

特聘教授,男,汉族,台湾省高雄市人,硕士生导师,厦门理工学院电气工程与自动化学院特聘教授
学科专业:控制工程与自动化

教育背景与工作经历

2006年博士毕业于英国Leicester大学控制及系统专业,国家高端境外专家、闽江学者;20188月调任厦门理工学院任教至今

讲授课程

人工智能、机械视觉

科研及教学成果

出版著作及代表性论文:

[1] Li-HongJuang* and Yu Fang, “Face Recognition and Skin Extraction under a Dynamic Video”, Robotics & Automation Engineering Journal, Vol. 3, No.1, pp.1-9, 2018.(EI)

[2] Li-Hong Juang*, Cian-Huei Lin and Ming-Ni Wu, “The 3d school guide system with affective computing of posture emotion expression”, International Robotics & Automation Journal, Vol. 1, No.2, pp.1-5, 2018.(EI)

[3] Li-Hong Juang* and Jian-Sen Chang, “Complex Tour Vision Tracking Based on Humanoid Robot”, submitted to IEEE Robotics & Automation Magazine, 2017. (SCI, IF=1.822)

[4] Li-Hong Juang* and Sheng-Xiang Chang, “Multi-Sensory and Vision Fusion Based on Service Robotic”, submitted to IEEE Robotics & Automation Magazine, 2017. (SCI, IF=1.822)

[5] Li-Hong Juang* and Yi-Jin Lee, “Catching Model for Fixed Objects Based on Humanoid Robot”, submitted to Autonomous Robots, 2017. (SCI, IF=1.547)

[6] Li-Hong Juang* and Yi-Hua Zhou, “Active Speech Communication Research Based on Two Humanoid Robots”, submitted to Autonomous Robots, 2017. (SCI, IF=1.547)

[7] Li-Hong Juang* and Hu Huang, “Multi-Objects with Complex Colors Recognition Research Based on Humanoid Robot”, submitted to Intelligent Service Robotics, 2017. (SCI, IF=0.605)

[8] Li-Hong Juang* and Yi-Xiang Chang, “Active Vision Communication Research Based on Two Humanoid Robots”, submitted to International Journal of Advanced Robotic Systems, 2017. (SCI, IF=0.615)

[9] Li-Hong Juang* and Jia-Feng Pan, “Object Tracking Research Based on Humanoid Robot”, submitted to International Journal of Advanced Robotic Systems, 2017. (SCI, IF=0.615)

[10] Li-Hong Juang*, Cian-Huei Lin and Ming-Ni Wu, “The 3D School Guide System with Affective Computing- An Example on Library”, submitted to IEEE Multimedia, 2017. (SCI, IF=2.13)

[11] Li-Hong Juang* and Jia-Nan Zhang, “The Operation Mode of Piscatorial IOT Based on Geographic Information”, International Journal of Computer Sciences and its Applications,vol. 1,No. 1, 1001, pp.1-9, 2017.(EI)

[12] Li-Hong Juang* and Shengxiang Zhang,“Flexible Design of Service Robot using Embedded System”,International Journal of Computer Sciences and its Applications,vol. 1,No. 1, 1004, pp.1-6, 2017.(EI)

[13] Li-Hong Juang* and Jian-Sen Zhang, “Group Robots”, International Journal of Computer Sciences and its Applications,vol. 1,No. 1, 1005, pp.1-6, 2017. (EI)

[14] Li-Hong Juang* and Ming-Ni Wu, “Tumor classification using automatic multi-thresholding”, Intelligent Automation and Soft Computing, vol. 1, no. 1, pp. 1-10, January 2017. (SCI, IF=0.534, Times cited:3)

[15] Li-Hong Juang*, Ming-Ni Wu and Shin-An Lin , “Gender recognition based on computer vision system”, Intelligent Automation and Soft Computing, vol. 3, no. 1, pp. 1-10, March 2017. (SCI, IF=0.534, Times cited:3)

[16] Li-Hong Juang*, and Lixin Zheng, “Phase Border Removing of MRI Brain Image by Wavelet Transform with Symmetrization Technique”, Journal of Mechanical and Automation Engineering, JMAE-1-103, pp. 1-8, 2016. (EI)

[17] Li Qing, Xie Yishou, Zheng Lixin, Zhou Kaiting, Zhang Yukun, and Li-Hong Juang, “STEP-SA1400 Robot Kinematics Modeling and Simulation”, Journal of Huaqiao University Technology Report, pp. 1-5, 2016.

[18] Li-Hong Juang*, Wei-Jen Chen and Lixin Zheng, “Computer Vision Methodology for Structural Health Monitoring”, Journal of Mechanical and Automation Engineering, JMAE-1-105, pp. 1-16, 2016. (EI )

[19] Li-Hong Juang*, Shin-Bau Wong and Lixin Zheng, “Design for an Intelligent BIM Based Energy Management System”, Journal of Mechanical and Automation Engineering, JMAE-1-107, pp. 1-15, 2016.( EI )

[20] Li-Hong Juang*, Dan Yang and Lixin Zheng, “Planning of the Geographic Information System Application to Agricultural Land Use”, Journal of Mechanical and Automation Engineering, JMAE-1-104, pp. 1-12, 2016.( EI)

[21] Li-Hong Juang*, Wei-Ya Fong and Lixin Zheng, “Meteorological Information System Based on WebGIS”, Journal of Mechanical and Automation Engineering, JMAE-1-106, pp. 1-20, 2016.( EI)

[22] Li-Hong Juang and Ming-Ni Wu, “Fall Down Detection under Smart Home System”, Journal of Medical System, vol. 39, no.107, pp.1-12, 2015.(SCIE, IF=2.213)

[23] Li-Hong Juang*, Ming-Ni Wu and Feng-Mao Tsou, “A Human Dynamic Image Segmentation by Merging Colors and Depth Information”, International Journal of Control, Automation, and Systems, vol.13, no.5, pp.1-8, 2015. (SCIE, IF=1.2606)

[24] Li-Hong Juang* and Lixin Zheng, Design of Two-Wheeled Ultrasonic Wheel, Journal of Mechanical and Automation Engineering, JMAE-1-101, pp. 1-8, 2015. (EI )

[25] Li-Hong Juang* and Lixin Zheng, Levitation Effect Study based on a Disc-type Piezoelectric Ultrasonic Stator, Journal of Mechanical and Automation Engineering, JMAE-1-102, pp. 1-7, 2015. (EI )

[26] Li-Hong Juang*, Ming-Ni Wu and Zhi-Zhong Weng, “Object Identification Using Mobile Devices”, Measurement, vol. 51, no.5, pp.100-111, 2014.(SCI, IF=1.7146, Times cited:10)

[27] Yi-Zi Wang, Li-Hong Juang* and  Wen-Hua Liu “A New Design Concept by Using BIM for Reforming an Energy-saving Campus Building”, Applied Mechanics and Materials, vol. 368-370, pp. 1191-1195, 2013(EI, Times cited:1)

[28] Li-Hong Juang* and Ming-Ni Wu, "Psoriasis Image Identification Using K-means Clustering with Morphological Processing", Measurement, vol. 44, no. 5, pp.859-905, 2011.(SCI, IF=1.7146, Times cited:20)

[29] Li-Hong Juang* and Ming-Ni Wu, "MRI Brain Lesion Image Detection Based on Color-Converted K-Means Clustering Segmentation", Measurement, vol. 43, no. 7, pp.941-949, 2010.(SCI, IF=1.7146, Times cited:30 )

[30] Li-Hong Juang* and Ming-Ni Wu,"Image Noise Reduction Using Wiener Filtering with Pseudo-inverse ", Measurement, vol. 43, no. 10, pp.1649-1655, 2010.(SCI, IF=1.7146, Times cited:15)

[31] Li-Hong Juang*, "X-Ray Chest Image Reconstruction by Radon Transform Simulation with Fan-Beam Geometry" Measurement, vol. 43, no. 3, pp. 447-453, 2010.(SCI, IF=1.7146, Times cited:2 )

[32] Li-Hong Juang*, "Two-Wheeled Piezoelectric System", Intelligent Automation and Soft Computing, vol. 16, no. 1, pp. 1-11, 2011. (SCI, IF=0.534, Times cited:3)

[33] Li-Hong Juang*, "Finite Element Modelling for a Piezoelectric Ultrasonic System", Measurement, vol. 43, no. 10, pp.1387-1397, 2010.(SCI, IF=1.7146, Times cited:4)

[34] Puu-An Juang* and Ching-Chih Tsai, "Analysis and Measurement of Lateral Elliptic Motion Effect for an Asymmetric Disc-type Ultrasonic Motor" Mechanical System and Signal Process, vol. 24, no. 1, pp. 312-322, 2010.(SCI,IF=3.361, Times cited:6 )

[35] Puu-An Juang*, and Chun-Liang Lin, "The electro-mechanical transfer functions of an ultrasonic wheel system", Measurement, vol. 42, no. 12, pp.1417-1425, 2009.(SCI , IF=1.7146, Times cited:5)

[36] Puu-An Juang* and Ching-Chih Tsai, " Characterization of an Asymmetric Disc-type Ultrasonic Motor with Single-Phase Current Drive", IEEE Transactions on Instrumentation and Measurement., vol. 58, no. 9, pp. 3122-3129, 2009.(SCI, IF=2.987, Times cited:10)

[37] Puu-An Juang* and Ching-Chih Tsai, " Equivalent Circuit Modeling of an Asymmetric Disc-type Ultrasonic Motor", IEEE Transactions on Instrumentation and Measurement., vol. 58, no. 7, pp. 2351-2357, 2009.(SCI, IF=2.987, Times cited:10)

[38] Puu-An Juang*, " Analytic , Modelling and Driving for an Ultrasonic Wheel System", Mechanical System and Signal Process, vol.23 , no.2 , pp.514-522, 2009.(SCI, IF=3.361, Times cited:2 )

[39] Puu-An Juang* and Ching-Chih Tsai, " Characterization of One-Wheeled Actuator Driven by One Piezoelectric Element", Measurement., vol. 42, no.1, pp.112-118, 2009.(SCI, IF=1.7146, Times cited:3 )

[40] Puu-An Juang*, " Piezoelectric Wheel System", Japanese Journal of Applied Physics ., vol. 46, no. 10A, pp. 6737-6740, October, 2007.(SCI, IF=2.135, Times cited:5)

[41] Puu-An Juang*, “Modal Analysis and Proof of a Novel Disc-type Ultrasonic Motor”, Inter. J. Automation and Control, Vol. 1, No.1, pp.84-99, January, 2007.(SCIE)

[42] Puu-An Juang* and D. W. Gu, “Speed Control of a New Disc-type Ultrasonic Motor by Using Current Controller”, IEEE Transactions on Power Electronics, vol. 21, no.1, pp. 219-224, January, 2006.(SCI, IF=5.356, Times cited:20)

[43] Puu-An Juang* and D. W. Gu, “Analysis, Measurement and Control of a New Disc-type Ultrasonic Motor System”, International Journal of Mechatronics, vol. 16, pp. 1-12, February, 2006.(SCI, IF=3.164, Times cited:6)

[44] Puu-An Juang* and D. W. Gu, "Finite Element Analysis of a New Disc-type Ultrasonic Stator", IEEE Transaction on Ultrasonics, Ferroelectrics and Frequency Control, vol. 50, no. 4, pp. 368-375, April, 2003.(SCI, IF=5.678, Times cited:6 )

[45] Puu-An Juang*  and W. Brenner, "Vibration Characteristic Identification of a New Disc-type Ultrasonic Stator by Experiment", Journal of Micromechanics & Microengineering, vol. 12, pp.598-603, 2002.(SCI, IF=2.73, Times cited:3)

[46] Puu-An Juang*  and W. Brenner, "The Transfer Function of a New Disc-type Ultrasonic Motor", Sensors & Actuators A: Physical, vol. 3365, pp. 1-9, 2002.(SCI, IF=2.703, Times cited:6)

[47] Puu-An Juang*  and H. J. Hardtke, "A New Disc-type Ultrasonic Motor", Sensors & Actuators A: Physical, vol. 3094, pp. 1-10, 2001.(SCI, IF=2.703, Times cited:30)

[48] Puu-An Juang*  and Ming-Ni Wu, "Active Control Using a Fiber-optic Interferometric Sensor", Smart Materials & Structures., vol. 4, pp. 370-372, 1995.(SCI, IF=2.802, Times cited:10)

[49] Puu-An Juang*, "Rebar Location Detection Using Magnetic Field Reflection", Structural Engineering, vol. 10, no. 4, pp. 89-91, December 1995.(SCI, IF=1.2, Times cited:10)

[50] Chen-Hsin Ho, Puu-An Juang* and Yaw-Dawn Pai, "The Depth of Concrete Pile Detection Using Impact-Echo Method", Structural Engineering, vol. 10, no. 1, pp. 93-95, March 1995.(SCI, IF=1.2, Times cited:10)

[51] Puu-An Juang* and Wen-Hsien Chen, "Ultrasonic Testing for End Plug Weld Joints of Fuel Elements", Testing Technology, vol. 12, no. 5, pp. 5-13, 1994.(EI)

[52] Puu-An Juang* and Hou-Lung Lee, "Improvement of Micromagnetic Transducer for Low Frequency measurement", Testing Technology, vol. 12, no. 6, pp. 49-54, 1994.(EI)

[53] Chen-Hsin Ho, Puu-An Juang* and Yaw-Dawn Pai, "The Depth Measurement in Concrete Pile by Impact-Echo Method", Testing Technology, vol. 12, no. 4, pp. 32-36, 1994. (EI)

[54] Puu-An Juang* and Yaw-Dawn Pai, "Detection of Concrete Containing Rebar Location by Magnetic Field Reflection", Testing Technology, vol. 12, no. 6, pp. 55-59, 1994. (EI)

[55] Puu-An Juang*, “Modal Analysis and Proof of a Novel Disc-type Ultrasonic Motor”, Inter. J. Automation and Control, vol. 1, no.1, pp.84-99, 2007.(SCIE)

主持参与课题及经费:

[1] 国家外专局,G20163600033,智能机器视觉及云端辅助决策系统研究,2016/1-2019/12100万元,在研,主持。

[2] 华侨大学科研启动经费、600005-Z15Y0064、基于色彩信息深度补偿对结构健康视觉检测问题的探讨及研究、2015/8-2018/730万元、在研、主持。

[3] 国科会、NSC101-2119-M-035-005、应用分布式计算技术于微型移动式传感器实时量体信息分析之研究、2012/8 - 2015/71600000NT元、已结题、主持。

[4] 水利署、MOEAWRA1000124、深层海水结合异种资源之低温差发电可行性规划、2011/6 - 2011/123999600NT元、已结题、主持。

教学、科研成果(获奖、专利、版权、著作权、外观设计等):

[1] 庄礼鸿,张壹翔,一种基于双机器人视觉沟通的动作识别方法,中国201810107145.X, 2018.02.02

[2] 庄礼鸿,赵一画, 一种双人形机器人语音沟通的交互方法 中国201810135081.4 2018.02.09

[3] 庄礼鸿,李奕锦,一种人形机器人抓取球体的方法中国201810171326.9 2018.03.01

[4] 庄礼鸿,黄鹄,一种基于人形机器人识别物体形状和色彩的方法 中国 201810107611.4 2018.02.02

[5] 庄礼鸿方宇, 一种视频中动态人脸识别方法, 专利申请受理通知书201710338761.1

[6] 庄礼鸿, 吴明霓, 林千慧, 一种基于肢体动作进行情感运算的3D校园导览方法及系统, 专利申请受理通知书201710437831.9

[7] 庄礼鸿, 吴明霓, 翁至中, 物品识别方法, 专利授权(2017ZI. 201310526390.1

[8] 庄礼鸿, 吴明霓, 林千慧, 一种基于注意力辨识之情感运算导览方法及系统, 专利申请受理通知书20170710575393.2

[9] 庄礼鸿, 叶美玲, 郑力新,基于绿色节能交通网络的教学及成效评估系统申请公布号:CN105679134A

[10] 庄礼鸿, 刘章恒, 郑力新,近岸海域水环境评价及应急预警系统申请公布号:CN105809284A

[11] 庄礼鸿, 郑力新, 基于物联网和云计算的智能城市信息系统申请公布号:CN105825462A

[12] 庄礼鸿, 一种农业种植辅助决策系统(申请案号: 201410030091.3发明)

[13] 庄礼鸿, 吴明霓,邹丰懋, 一种基于Kinect和网络摄像机的动态人像合成方法(申请案号: 201510023482.7发明)

[14] 庄礼鸿,一种基于机器视觉的建筑结构裂缝检测及修复方法(申请案号: 201410030091.3发明)

[15] 庄礼鸿,郭润章,地理搜索咨询系统(软件著作权申请案号: 2014R11L017288)

[16] 庄礼鸿, 吴明霓,翁至中, 物品识别方法(申请案号: 201310526390.1发明)

[17] 庄礼鸿,吴明霓,林信安,基于连续步态影像的性别识别方法(申请案号: 201310518235.5发明)

[18] 庄礼鸿, 吴明霓,智慧看护方法(申请案号: 201310567764.4发明)

[19] 庄礼鸿, 吴明霓,智能家居监控系统及方法(申请案号: 201310565632.8发明)

[20] 庄礼鸿, 吴明霓,肿瘤图像处理方法(申请案号: 201310718243.4发明)

[21] 庄礼鸿, 吴明霓,邹丰懋, 前景图像提取方法(申请案号: 201310586613.3发明)

[22] 庄普安,蔡清池, 微步位移装置(证号: 发明第305193号)

[23] 庄普安, 超声波换能器及其制造方法((证号: 发明第327490号)

[24] 庄普安, 蔡清池, 压电式微型发电机(申请案号: 发明第95135619号)

[25] 庄普安, 蔡清池, 声音传输方法及使用该方法之装置((证号: 发明第301964号)

[26] 庄普安, 蔡清池, 利用可见光传输数据的方法及其系统(申请案号: 发明第95138247号)

[27] 瞿嘉骏, 庄普安, 颜鸿森,可上下阶梯之搬运装置(证号: 发明第175397号)

[28] 瞿嘉骏,庄普安, 颜鸿森,Conveying apparatus for ascending or descending stairways(US   patent No. US 6550787B1)

[29] 陈柏熹, 胡龙城, 庄普安, 机车液压式防滑剎车系统(证号:发明第182955号)

陈柏熹,胡龙城, 庄普安,Hydraulic anti-blocking brake system   for motorcycle(US patent No. US 20030230932A1)